Atari DOS

Encyclopedia : A : AT : ATA : Atari DOS

Atari DOS, (often just known as DOS), was the disk operating system used with the Atari 8-bit family of computers.

Getting the Atari computer to access a disk drive required operating system extensions to be loaded into the computer. These extensions to the operating system added the disk handler and other file management features.

The most important extension was the disk handler. In Atari DOS 2.0, this was the File Management System, or FMS. The FMS was an implementation of a File system that loaded from a floppy disk. This meant additional memory was needed to run with DOS loaded, at least 32K RAM.

Atari DOS version 2.5

Contents

1 Versions of Atari DOS

1.1 DOS 1.0
1.2 DOS 2.0
1.3 DOS 3.0
1.4 DOS 2.5
1.5 DOS XE
1.6 DOS 4.0

2 Third-party DOS Programs

2.1 SmartDOS
2.2 OS/A+ and DOS XL
2.3 Super DOS
2.4 TopDOS
2.5 MyDOS
2.6 SpartaDOS
2.7 BW-DOS

3 Technical details

3.1 Disk Formats

4 References
5 External links

Versions of Atari DOS

There were several versions of Atari DOS available.

DOS 1.0

The first version of DOS from Atari, all commands were accessible from the menu only. Came with the 810 disk-drives. Entirely memory resident. This made it fast, but took away memory space.

DOS 2.0

Also known as DISK OPERATING SYSTEM II VERSION 2.0S

The second (and more popular) version of DOS from Atari. Came with the 810 disk-drives and some early 1050 disk-drives. This is considered to be the lowest common denominator for ATARI DOSses, as any Atari-compatible disk-drive and read a disk formatted with DOS 2.0S.

DOS 2.0S consisted of DOS.SYS and DUP.SYS. DOS.SYS was loaded into memory, DUP.SYS contained the disk utilities and was loaded only when the user exited to DOS.

In addition to bug fixes, DOS 2.0S featured improved NOTE/POINT support and the ability to automatically run an Atari executable file if it was named AUTORUN.SYS. Since user memory was erased when DUP.SYS was loaded, an option to create a MEM.SAV file was added. This stored user memory in a temporary file (MEM.SAV) and restored it after DUP.SYS was unloaded. The previous menu option from DOS 1.0, N. DEFINE DEVICE, was replaced with N. CREATE MEM.SAV in DOS 2.0S.

Version 2.0S was for single-density disks, 2.0D was for double-density disks. 2.0D was for the 815 Dual Disk Drive.

DOS 3.0

A new version of DOS that came bundled with the new 1050 disk-drives from Atari. This made use of the new Enhanced Density capability (referred to by Atari as Dual Density) offered by the 1050.

By organizing sectors into blocks, Atari was anticipating larger capacity floppy disks, but this resulted in incompatibility with DOS 2.0S. Files converted to DOS 3 could not be converted back to DOS 2.0.

DOS 3.0 provided built-in help via the Atari HELP key and/or the inverse key. Help files needed to be present on the dos disk to function properly.

Due to complaints and bugs, Atari released DOS 2.5.

DOS 2.5

Also known as DISK OPERATING SYSTEM II VERSION 2.5

After listening to complaints by their customers, Atari Released an improved version of their previous DOS. This allowed the use of Enhanced Density disks, and there was a utility to read DOS 3 disks. An additional option was added to the menu (P. FORMAT SINGLE) to format single-density disks. DOS 2.5 was shipped with 1050 disk drives and some early XF551 disk-drives.

Included utilities were DISKFIX.COM, COPY32.COM, SETUP.COM and RAMDISK.COM.

DOS XE

Codename during production: ADOS

When the Atari XF551 drive came out, not only was it Atari's first drive that could read double-density disks, it was also double sided. So support was added in the DOS for double-density and double-sided disks.

A new proprietary file format made DOS XE incompatible with DOS 2.0S or DOS 2.5. A separate utility was needed for reading older 2.0 files.

Only XL/XE computers were supported, DOS XE did not work with the older 400/800 computers.

DOS XE also supported date-stamping of files, sub-directories and burst I/O for the XF551 drive.

Last DOS made by Atari for the Atari 8-bit family.

DOS 4.0

Codename during production: QDOS

Designed for the never-released 1450XLD, the rights were returned to the author who placed it in the public-domain. It was later published by ANTIC Software. Using blocks instead of sectors, it supported single, double, enhanced and double-sided drives. Not compatible with DOS 2 or 3 disks but could read files from them. Did not automatically switch densities, it was necessary to go to the menu and manually select the correct density.

Written by Michael Barall.

Third-party DOS Programs

Many of these DOSses were released by manufacturers of third party drives, anyone who made drive-modifications, or anyone who was dis-satisfied with the available DOSses. Often, these DOSses could read disks in higher densities, and could set the drive to read disks faster (using Warp Speed or Ultra-Speed techniques). Most of these DOSses (except Sparta DOS) were DOS 2.0 compatible.

SmartDOS

Menu driven DOS that was compatible with DOS 2.0. Among the first third-party DOS programs to support double-density drives.

Many enhancements including sector copying and verifying, speed checking, turning on/off file verifying and drive reconfiguration.

Written by John Chenoweth and Ron Beiber.

OS/A+ and DOS XL

DOS produced by Optimized Systems Software. Compatible with DOS 2.0 - Allowed the use of Double Density floppies. Unlike most ATARI DOSses, this used a command line instead of a menu. DOS XL provided a menu program in addition to the command line.

Super DOS

This DOS could read SS/ED/DD/DS disks, and made use of all known methods of speeding up disk-reads supported by the various 3rd party drive-manufacturers.

TopDOS

Menu driven DOS with enhanced features. Sorts disk directory listings and can set display options. File directory can be compressed. Can display deleted files and undelete them. Some advanced features required a proprietary TOPDOS format.

Published by Eclipse Software.

MyDOS

This DOS adds the ability to use sub-directories, and supports hard-drives.

Published by Wordmark Systems, includes complete source code.

SpartaDOS

This DOS used a command-line interface. Was not compatible with DOS 2.0, but could read DOS 2.0 disks. Supports subdirectories and hard drives being capable of handling filesystems sized up to 16 MB. Included the capability to create primitive batch files. There was also a more sophisticated version called SpartaDOS X, which strongly resembles MS-DOS in its look and feel.

BW-DOS

A SpartaDOS compatible DOS released many years later.

Freeware by Jiří Bernasek.

Technical details

Disk Formats

A number of different formats existed for Atari disks. The standard Atari single-sided, single-density disk had 720 sectors divided into 40 tracks. After formatting, 707 sectors were free. Each 128 byte sector used the last 3 bytes for housekeeping data (bytes used, file number, next sector), leaving 125 bytes for data.

Single-Sided, Single-Density: 40 tracks with 18 sectors per track, 128 bytes per sector. 90K capacity.
Single-Sided, Double-Density: 40 tracks with 18 sectors per track, 256 bytes per sector. 180K capacity.
Single-Sided, Enhanced-Density: 40 tracks with 26 sectors per track, 128 bytes per sector. 127K capacity.
Double-Sided, Double-Density: 80 tracks (40 tracks per side) with 18 sectors per track, 256 bytes per sector. 360K capacity.

References

[Inside Atari DOS] by Bill Wilkinson
[Mapping the Atari, Revised Edition] by Ian Chadwick

External links

[What are Atari DOS 1, DOS 2.0S, DOS 3, DOS 2.5, and DOS XE?] — From the [Atari 8-bit FAQ].
[Atari DOS Reference Manual] — Reference manual for DOS 3.
[Antic Vol.4 No.3] Everything You Wanted To Know About Every DOS
[DosAtariFour] Documentation on Atari DOS 4
[XFormer, a free Atari Emulator which needs no ROM's and other items]

From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.