Opentopia Directory Encyclopedia Tools

Caproni Ca.3

Encyclopedia : C : CA : CAP : Caproni Ca.3


The Caproni Ca.3 was an Italian heavy bomber of the World War I and post-war era. It was the definitive version of the series of aircraft that began with the Caproni Ca.1 in 1914.

Caproni Ca.3

Development

The development of the Ca.1 through the Ca.2 continually suggested the benefits of ever-increasing amounts of power to the very sound airframe. The Ca.3 built on the Ca.2 by also replacing the two engines mounted on the booms with the same Isotta-Fraschini engine that had been used as the central, pusher engine on that design. The prototype flew in late 1916 and it was soon put into production. Known to Caproni at the time as the Caproni 450 hp, the Italian Army designated it the Ca.3, and in Caproni's post-war redesignation, it became the Ca.33. Somewhere between 250 and 300 of these aircraft were built, supplying the Italian Army and Navy (the latter using the type as a torpedo bomber) and the French Army. Late in the war, Robert Esnault-Pelterie built the type under licence in France, building an additional 83 (some sources say only 19) aircraft.

Note: there is some variation in published sources over early Caproni designations. The confusion stems, in part, from three separate schemes used to designate these aircraft - Caproni's in-house designations of the time, those used by the Italian Army, and designations created after the war by Caproni to refer to past designs.

Service history

The Ca.1 entered service with the Italian Army in Summer of 1915 and first saw action on August 20 1915, attacking the Austrian air base at Aisovizza. Fifteen bomber squadrons (1-15 Squadriglia) were eventually equipped with Ca.1, Ca.2, and Ca.3 bombers, mostly bombing targets in Austro-Hungary. The 12th squadron operated in Libya. In 1918 three squadrons (3, 14 and 15) operated in France.

Apart from the Italian Army, Caproni Ca.3s were also used in British squadrons, before introducing of Handley Page Type O bombers. Original and licence-built ones were used by France (original Caproni were used in French CAP escadres, licence built examples in CEP escadres). They were also used by the US Expedionary Force.

Some of the Ca.36Ms supplied after the war were still in service to see action in Mussolini's first assaults on North Africa.

Variants

All of the following designations were applied after the war. At the time, all were known as the 300 hp by Caproni and the Ca.3 by the Army.

Description:

Three-engine biplane of a wooden construction, covered with fabric. Crew: 4 in an open central nacelle (front gunner, two pilots and rear gunner-mechanic). The rear gunner manned upper machine guns, standing upon the central engine in a protective "cage", just before a propeller. Tricycle landing gear.

Armament: 2 to 4 Revelli 6.5mm or 7.7mm machine guns: 1 in front ring mounting and 1, 2 or sometimes even 3 in an upper ring mounting. Bombs suspended under the hull.

References

Specifications (Ca.36)

General characteristics

Performance

Armament

Operators

Museum Displays

Related content

Related development: Ca.1 - Ca.2 - Ca.5

Comparable aircraft:

Designation sequence: Ca.1 - Ca.2 - Ca.3 - Ca.4 - Ca.5


Lists of Aircraft | Aircraft manufacturers | Aircraft engines | Aircraft engine manufacturers

| Airlines | Air forces | Aircraft weapons | Missiles | Timeline of aviation

 


From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.

Search Titles
0123456789
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ?

E-mail this article to:

Personal Message: