Opentopia Directory Encyclopedia Tools

DBm

Encyclopedia : D : DB : DBM : DBm



 

The correct title of this } is }}}. The initial letter is capitalized due to [Naming conventions #Lower case first lettertechnical restrictions].
dBm is an abbreviation for the power ratio in decibel (dB) of the measured power referenced to one milliwatt (mW). It is used in radio, microwave and fiber optic work as a convenient measure of absolute power because of its capability to express both very large and very small values in a short form. dBm (or dBmW) and dBW are independent of impedance.

Since it is referenced to the watt, it is an absolute unit, used when measuring absolute power. It should not be confused with dB, a dimensionless unit, which is used when measuring the ratio between two values, such as signal-to-noise ratio.

Unit conversion

Zero dBm equals one milliwatt. A 3 dBm increase represents roughly doubling the power, which means that 3 dBm equals roughly 2 mW. For a 3 dBm decrease the power is reduced by about one half, making −3 dBm equal to about 0.5 milliwatt. To express an arbitrary power P as x dBm, or go in the other direction, the equations

[x = 10 \log_(P / (1 \ \mathrm))]
and
[P =(1 \ \mathrm) 10^],
respectively, should be used. Below is table summarizing useful cases:

dBm level Power Notes
80 dBm 100000 W Typical transmission power of FM radio station
60 dBm 1000 W Typical RF power inside microwave oven
40 dBm 10 W
36 dBm 4 W
30 dBm 1 W Typical RF leakage from microwave oven
27 dBm 500 mW Typical cellular phone transmission power
26 dBm 400 mW
25 dBm 320 mW
24 dBm 250 mW
23 dBm 200 mW
22 dBm 160 mW
21 dBm 125 mW
20 dBm 100 mW Bluetooth Class 1 radio, 100 m. range
15 dBm 32 mW
10 dBm 10 mW
5 dBm 3.2 mW
4 dBm 2.5 mW
3 dBm 2.0 mW
2 dBm 1.6 mW
1 dBm 1.3 mW
0 dBm 1.0 mW Bluetooth standard (Class 3) radio, 10 m. range
−1 dBm 0.79 mW
−5 dBm 0.32 mW
−10 dBm 0.1 mW
−20 dBm 0.01 mW
−30 dBm 0.001 mW
−40 dBm 0.0001 mW
−50 dBm 0.00001 mW
−60 dBm 0.000001 mW
−70 dBm 0.0000001 mW Average range (−60 to −80dBm) of Wireless signal over a network.
−80 dBm 0.00000001 mW
−111 dBm Thermal noise floor for commercial GPS signal bandwidth (2MHz).
−127.5 dBm 0.00000000000018 mW Typical received signal power from GPS satellite.
−174 dBm Thermal noise floor for 1 Hz bandwidth.
−infinity dBm 0 mW

Note 2: In DOD practice, unweighted measurement is normally understood, applicable to a certain bandwidth, which must be stated or implied.

Note 3: In European practice, psophometric weighting may be implied, as indicated by context; equivalent to dBm0p, which is preferred.

See also

Zero dBm transmission level point

Source

This article contains material from the Federal Standard 1037C (in support of MIL-STD-188), which, as a work of the United States Government, is in the public domain.

External links

 


From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.


Search Titles
0123456789
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ?

E-mail this article to:

Personal Message: