Diagonalizable matrix

Encyclopedia : D : DI : DIA : Diagonalizable matrix

---

In linear algebra, a square matrix A is called diagonalizable if it is similar to a diagonal matrix, i.e. if there exists an invertible matrix P such that P ^-1AP is a diagonal matrix. If V is a finite-dimensional vector space, then a linear map T : V → V is called diagonalizable if there exists a basis of V with respect to which T is represented by a diagonal matrix. Diagonalization is the process of finding a corresponding diagonal matrix for a diagonalizable matrix or linear map.

Diagonalizable matrices and maps are of interest because diagonal matrices are especially easy to handle: their eigenvalues and eigenvectors are known and one can raise a diagonal matrix to a power by simply raising the diagonal entries to that same power.

The fundamental fact about diagonalizable maps and matrices is expressed by the following:

• An n-by-n matrix A over the field F is diagonalizable if and only if the sum of the dimensions of its eigenspaces is equal to n, which is the case if and only if there exists a basis of Fⁿ consisting of eigenvectors of A. If such a basis has been found, one can form the matrix P having these basis vectors as columns, and P ^-1AP will be a diagonal matrix. The diagonal entries of this matrix are the eigenvalues of A.
• A linear map T : V → V is diagonalizable if and only if the sum of the dimensions of its eigenspaces is equal to dim(V), which is the case if and only if there exists a basis of V consisting of eigenvectors of T. With respect to such a basis, T will be represented by a diagonal matrix. The diagonal entries of this matrix are the eigenvalues of T.

Another characterization: A matrix or linear map is diagonalizable over the field F if and only if its minimal polynomial is a product of distinct linear factors over F.

The following sufficient (but not necessary) condition is often useful.

• An n-by-n matrix A is diagonalizable over the field F if it has n distinct eigenvalues in F, i.e. if its characteristic polynomial has n distinct roots in F.
• A linear map T : V → V with n=dim(V) is diagonalizable if it has n distinct eigenvalues, i.e. if its characteristic polynomial has n distinct roots in F.

As a rule of thumb, over C almost every matrix is diagonalizable. More precisely: the set of complex n-by-n matrices that are not diagonalizable over C, considered as a subset of C^n×n, is a null set with respect to the Lebesgue measure. One can also say that the diagonalizable matrices form a dense subset with respect to the Zariski topology: the complement lies inside the set where the discriminant of the characteristic polynomial vanishes, which is a hypersurface. From that follows also density in the usual (strong) topology given by a norm.

The same is not true over R. As n increases, it becomes (in some sense) less and less likely that a randomly selected real matrix is diagonalizable over R.

Examples

How to diagonalize a matrix

Consider a matrix

[A=\begin1 & 2 & 0 \\0 & 3 & 0 \\2 & -4 & 2 \end.]

This matrix has eigenvalues

[ \lambda_1 = 3, \quad \lambda_2 = 2, \quad \lambda_3= 1. ]

So A is a 3-by-3 matrix with 3 different eigenvalues, therefore it is diagonalizable.

If we want to diagonalize A, we need to compute the corresponding eigenvectors. They are

[ v_1 = \begin -1 \\ -1 \\ 2 \end, \quad v_2 = \begin 0 \\ 0 \\ 1 \end, \quad v_3 = \begin -1 \\ 0 \\ 2 \end. ]

One can easily check that [A v_k = \lambda_k v_k].

Now, let P be the matrix with these eigenvectors as its columns:

[P=\begin-1 & 0 & -1 \\-1 & 0 & 0 \\2 & 1 & 2 \end.]

Then P diagonalizes A, as a simple computation confirms:

[P^AP =\begin0 & -1 & 0 \\2 & 0 & 1 \\-1 & 1 & 0 \end\begin1 & 2 & 0 \\0 & 3 & 0 \\2 & -4 & 2 \end\begin-1 & 0 & -1 \\-1 & 0 & 0 \\2 & 1 & 2 \end =\begin3 & 0 & 0 \\0 & 2 & 0 \\0 & 0 & 1\end.]

Note that the eigenvalues [\lambda_k] appear in the diagonal matrix.

Matrices that are not diagonalizable

Some real matrices are not diagonalizable over the reals. Consider for instance the matrix

[ B = \begin 0 & 1 \\ -1 & 0 \end. ]

The matrix B does not have any real eigenvalues, so there is no real matrix Q such that [Q^BQ] is a diagonal matrix. However, we can diagonalize B if we allow complex numbers. Indeed, if we take

[ Q = \begin 1 & \textrm \\ \textrm & 1 \end, ]

then [Q^BQ] is diagonal.

However, there are also matrices that are not diagonalizable, even if complex numbers are used. This happens if the geometric and algebraic multiplicities of an eigenvalues do not coincide. For instance, consider

[ C = \begin 0 & 1 \\ 0 & 0 \end. ]

This matrix is not diagonalizable: there is no matrix U such that [U^CU] is a diagonal matrix. Indeed, C has one eigenvalue (namely zero) and this eigenvalue has algebraic multiplicity 2 and geometric multiplicity 1.

An application

Diagonalization can be used to compute the powers of a matrix A efficiently, provided the matrix is diagonalizable. Suppose we have found that

[P^AP = D]

is a diagonal matrix. Then

[A^k = (PDP^)^k = PD^kP^]

and the latter is easy to calculate since it only involves the powers of a diagonal matrix.

For example, consider the following matrix:

[M =\begina & b-a \\ 0 &b \end.]

Calculating the various powers of M reveals a surprising pattern:

[M^2 = \begina^2 & b^2-a^2 \\ 0 &b^2 \end,\quadM^3 = \begina^3 & b^3-a^3 \\ 0 &b^3 \end,\quadM^4 = \begina^4 & b^4-a^4 \\ 0 &b^4 \end,\quad \ldots]

The above phenomenon can be explained by diagonalizing M. To accomplish this, we need a basis of R² consisting of eigenvectors of M. One such eigenvector basis is given by

[\mathbf=\begin 1 \\ 0 \end=\mathbf_1,\quad \mathbf=\begin 1 \\ 1 \end=\mathbf_1+\mathbf_2,]

where e_i denotes the standard basis of Rⁿ. The reverse change of basis is given by

[ \mathbf_1 = \mathbf,\qquad \mathbf_2 = \mathbf-\mathbf.]

Straightforward calculations show that

[M\mathbf = a\mathbf,\qquad M\mathbf=b\mathbf.]

Thus, a and b are the eigenvalues corresponding to u and v, respectively. By linearity of matrix multiplication, we have that

[ M^n \mathbf = a^n\, \mathbf,\qquad M^n \mathbf=b^n\,\mathbf.]

Switching back to the standard basis, we have

[ M^n \mathbf_1 = M^n \mathbf = a^n \mathbf_1,]

[ M^n \mathbf_2 = M^n (\mathbf-\mathbf) = b^n \mathbf - a^n\mathbf = (b^n-a^n) \mathbf_1+b^n\mathbf_2.]

The preceding relations, expressed in matrix form, are

[M^n = \begina^n & b^n-a^n \\ 0 &b^n \end,]

thereby explaining the above phenomenon.

See also

• Jordan form
• Scaling (geometry)

External links

• [Diagonalization] on PlanetMath

References

• Roger A. Horn and Charles R. Johnson, Matrix Analysis, Chapter 1, Cambridge University Press, 1985. ISBN 0-521-30586-1 (hardback), ISBN 0-521-38632-2 (paperback).

 

---

From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.

Search Titles

0

1

2

3

4

5

6

7

8

9

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

?