F-16XL
Encyclopedia : F : F1 : F16 : F-16XL
The F-16XL is a derivative of the F-16 Fighting Falcon, with a cranked arrow delta wing that is over twice the size of that of the F-16. It was entered in the U.S. Air Force's Enhanced Tactical Fighter (ETF) competition but ultimately lost to the F-15E Strike Eagle. Several years after the prototypes were shelved, they were turned over to NASA for aeronautical study.
History
Enhanced Tactical Fighter competition
In 1977, The F-16XL started out as the F-16 SCAMP (Supersonic Cruise and Maneuvering Program), at the General Dynamics Ft. Worth Division. Under the leadership of Harry Hillaker, the original goal of the program was to demonstrate the applicability of SST technologies to military aircraft. Working closely with NASA's Langley Research Center, the company invested significant Internal Research and Development (IRAD) funds for wind tunnel testing and that led to an extensive preliminary design effort by 1978.In 1980, the USAF signed on as a partner, providing two early model F-16's for conversion (the third and fifth production airframes. In March of 1981, the USAF announced the Enhanced Tactical Fighter program to procure a replacement for the F-111. The concept envisioned an aircraft capable of launching deep interdiction missions without requiring additional support in the form of fighter escort or jamming support. General Dynamics submitted the F-16XL, while McDonnell Douglas submitted a variant of the F-15. In February of 1984, the USAF awarded the ETF to McDonnell Douglas, and both F-16XL aircraft were returned to the Air Force and placed in storage.
NASA
In 1988, the two airframes were taken out of storage and turned over to NASA for research. The first production craft was fitted with an active suction titanium glove encasing the left wing and delivered to the Ames-Dryden Flight Research Facility at Edwards AFB. Designed and built by North American Aviation (a division of Rockwell International), the glove had laser-cut holes that were nominally 0.0025 in (0.0635 mm) diameter. Distance between holes varied between 0.010 and 0.055 in (0.25 and 1.40 mm) depending on the suction. The glove covered over five square feet (0.5 m²) of the wing. It was intended to suck away turbulent airflow over the wing, restoring laminar flow and reducing drag. The aircraft was also involved in testing sonic boom characteristics, takeoff performance, and engine noise, for NASA's civil transport program.
The second aircraft (a two seater) had its experimental engine replaced with a General Electric F110-129. It accidentally achieved supercruise, a design goal of the F-16XL that was never attained in ETF testing, when it reached Mach 1.1 at 20,000 feet (6 km) on full military power. It was mounted with a passive fiberglass and foam glove on the right wing to examine supersonic flow, and an active glove on the left wing. This second glove was composed of fiberglass and foam over a titanium skin, and covers 75% of the wing's surface and 60% of its leading edge. The active portion consists the middle two-thirds of the glove, with laser-drilled holes leading to cavities beneath the wing. It was designed collaboratively by Langley research center, Dryden, Rockwell, Boeing, and McDonnell Douglas. The glove is intended as a testbed for supersonic laminar flow.
Design characteristics
The wing and rear horizontal control surfaces were replaced with a cranked-arrow delta wing, 120% larger than the original wing. Extensive use of carbon composites allowed the savings of 600 lb (270 kg) of weight but still 2,800 lb (1300 kg) heavier than the original.
Less noticeable is that the fuselage was lengthened by 56 inches (1.4 m) by the addition of 2 sections at the joints of the main fuselage sub-assemblies. With the new wing design, the tail section had to be canted up 3 degrees, and the ventral fins removed, to prevent them from striking the pavement during takeoff and landing. However, as the F-16XL exhibits greater stability than the native F-16, these changes were not detrimental to the handling of the aircraft.
These changes resulted in a 25% improvement in maximum lift-to-drag ratio in supersonic flight, and 11% in subsonic flight, and a plane that reportedly handled much smoother at high speeds and low altitudes. The enlargements increased fuel capacity by 82%. The F-16XL could carry twice the ordnance of the F-16 and deliver it 40% further. The enlarged wing allowed a total of 27 hardpoints on the plane:
- 16 wing stations of capacity 750 lb (340 kg) each
- 4 semi-submerged AMRAAM stations
- 2 wingtip stations
- 1 centerline station
- 2 wing "heavy/wet" stations
- 2 chin LANTIRN stations
Specifications (F-16XL number 2)
External links
Related content
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.