Flashlight
Encyclopedia : F : FL : FLA : Flashlight
- "Flashlight" is the NATO designation for the Yakovlev Yak-25 Soviet military jet.
General information
A typical flashlight consists of a small incandescent lightbulb with associated parabolic reflector, powered by electric batteries, and with an electric power switch. The components are mounted in a housing that contains the necessary electric circuit and provides ease of handling, a means of access to the batteries for replacement, and a clear covering over the lightbulb for its protection.Although a relatively simple device, its invention did not occur until the late 19th century because it depended upon the earlier invention of the electric battery and incandescent light bulb. The batteries in the first ones were of such short useful life that the common method of operating them was to flash them just long enough to discern the environs, and only as needed; hence the term "flash-light". It is, however, reminiscent of the far-earlier "bullseye" lantern.
LED flashlights
Recently, flashlights which use light-emitting diodes (LEDs) instead of conventional lightbulbs have become available. LEDs have existed for decades, mainly as low-power indicator lights. In 1999, Lumileds Corporation [link] of San Jose, CA introduced the Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED flashlight was the Arc LS in 2001.
LEDs can be significantly more efficient at lower power levels, hence use less battery energy than normal lightbulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours, although the LED efficiency advantage diminishes at higher power levels. LEDs also survive sharp blows that often break conventional lightbulbs.
LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlight becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.
A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more powerful LED lights do generate significant amounts of heat. For this reason higher-powered LED flashlights usually have metal bodies and can become warm during use.
Other flashlight designs
A headlamp is a flashlight worn on the head for hands-free operation. Powerful headlamps mounted on helmets have been used in mining for decades, but general-purpose ones with fabric straps are now also available.Sometimes a light is mounted to a handgun or rifle [link] [link]. See also Streamlight and Surefire.
Most flashlights are cylindrical in design, with the lamp assembly attached to one end. However, early designs came in a variety of shapes. Many resembled lanterns of the day, consisting largely of a box with a handle and the lamp attached to the front. Some others were made to have a similar appearance to candles. It is possible that future developments of battery and LED technology will bring interesting new designs. For instance, one very small light that exists now in 2004 consists of a few LEDs with a switch, designed to be an endcap for a 9-volt battery.
High-quality flashlights go for as much as several hundreds of dollars. Such flashlights are very advanced, using special batteries, have adjustable brightness levels, dive-depth waterproof ratings, interchangeable optics, and are very bright.
Other power sources
Since batteries can be a burdensome cost in developed countries, let alone in the third world, the development of self-powered flashlights is a welcome advance. Some use solar panels to recharge their batteries during the day.Some flashlights have an electrical generator built into it. Dynamo-powered flashlights have a winding crank connected to a stepper motor that feeds several diode bridges with their outputs connected in parallel feeding a field effect transistor that charges a capacitor that connects to one or more LEDs. Others generate electricity using electromagnetic induction. They use a strong permanent magnet that can freely slide up and down a tube, passing through a coil of wire as it does. Shaking the flashlight will charge a capacitor or a rechargeable battery that supplies a current to a light source, typically a light-emitting diode or, more rarely, an incandescent light bulb. However, these types of flashlights have been reported to be ineffective because of the low energy.
Gallery
See also
External links
- [Flashlight Museum] (Stuart Schneider)
- http://www.ledmuseum.org/ — review website for lights
- http://www.flashlightreviews.com/ — review website for lights
- http://www.flashlightnews.org/ — flashlight industry news
- http://www.flashlightmuseum.com/ - flashlight museum
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.