Ground-level power supply
Encyclopedia : G : GR : GRO : Ground-level power supply
Ground-level power supply, also known as surface current collection and Alimentation par Sol (APS) is a modern method of third-rail electrical pick-up for street trams. It was invented for the Bordeaux tramway, which was constructed from 2000 and opened in 2003. Currently this is the only place it is used, but there were and are proposals to install it elsewere:
- Nice (abandoned in favour of nickel metal hydride batteries)
- Edinburgh, Scotland
- Florence (Firenze), Italy
- Marseille, France
- Melbourne, Australia
Technology
It is used, primarily for aesthetic reasons, as an alternative to overhead lines. It is different from the conduit current collection system which was used in Washington, Manhattan and parts of London, which buried a third and fourth rail in an underground conduit (‘vault’) between the running rails.Unlike the track-side third rail used by most metro trains and some main-line railways, APS does not pose a danger to people or animals, and so can be used in pedestrian areas and city streets.
APS uses a third rail placed between the running rails, divided electrically into eight-metre segments with neutral sections between. Each tram has two power collection skates, next to which are antennae that send radio signals to energise the power rail segments as the tram passes over them. At any one time no more than two consecutive segments under the tram should actually be live.
Use in Bordeaux
Modern ground-level current collection was pioneered by the recent Bordeaux tramway. The public had assumed that the new system would use a traditional conduit system, like that of the Bordeaux trams which ran prior to 1958, and objected when they learned that it was not considered safe, and that overhead wires were to be used instead. Facing complaints both from the public and the French Ministry of Culture, planners developed APS as a modern way of replicating the conduit system. Bordeaux Citadis trams use pantographs and electric overhead lines in outlying areas.There are 12 km of APS tramway in the network of three-line network of 21.3 km total length, expected to be 40 km by 2007. Sources suggest that APS adds about €100,000 to the cost of the trams, whilst the infrastructure is about 300% more expensive than overhead wires.
Before use in Bordeaux, APS was tested and proved viable on a short section of reserved-track tramway in the French city of Marseilles. Nevertheless, Bordeaux has experienced problems, with APS being so temperamental that at one stage the Mayor issued an ultimatum that if reliability could not be guaranteed, it would have to be replaced with overhead wires. Although things have improved, in October 2005 it was announced that 1 km of APS tramway is to be converted to overhead wires.
Problems have included water-logging, when the water does not disperse or flow away quickly enough after heavy rain.
Historical note
The predecessors of APS were developed around 1900, and used on several tramway companies in Paris and in England. The main difference from APS was that the switching in of the contacts was done by strong electromagnets beneath each car. Each contact contained a fuse, which would be blown by an earthed safety shoe on the rear of the tram should the contact not have switched out. This proved to be not satisfactory, because the strong currents melted down the switch contacts, resulting in contacts frequently remaining 'live'. Associated with these systems were the inventors Dolter and Diatto.External links
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.