Low density polyethylene
Encyclopedia : L : LO : LOW : Low density polyethylene
| |
| LDPE has SPI resin ID code 4 |
Properties
LDPE is defined by a density range of 0.910 - 0.940 g/cc. It is unreactive at room temperatures, except by strong oxidizing agents, and some solvents cause its swelling. It can withstand temperatures of 80 °C continuously and 95 °C for a short time. Made in translucent or opaque variations, it is quite flexible, and tough to the degree of being almost unbreakable.It has more branching (on about 2% of the carbon atoms) than HDPE, so its intermolecular forces (instantaneous-dipole induced-dipole attraction) are weaker, its tensile strength is lower, and its resilience is higher. Also, since its molecules are less tightly packed and less crystalline because of the side branches, its density is lower.
Physical qualities
- Maximum Temperature: 176°F (80°C)
- Minimum Temperature: -58°F (-50°C)
- Autoclavable: No
- Melting Point: 248°F (120°C)
- Tensile Strength: (1700 psi)
- Hardness: SD55
- UV Resistance: Poor
- Translucent
- Excellent flexibility
- Specific Gravity: 0.92
Chemical resistance
- Excellent resistance (no attack) to dilute and concentrated acids, alcohols, bases and esters.
- Good resistance (minor attack) to aldehydes, ketones and vegetable oils.
- Limited resistance (moderate attack suitable for short term use only) to aliphatic and aromatic hydrocarbons, mineral oils and oxidizing agents.
- Poor resistance and not recommended for use with Halogenated hydrocarbons.[link]
Applications
LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, and various molded laboratory equipment. Its most common use is in plastic bags. Other products made from it include:
- Trays & general purpose containers
- Food storage and laboratory containers
- Corrosion-resistant work surfaces
- Parts that need to be weldable and machinable
- Parts that require flexibility, for which it serves very well
- Very soft and pliable parts
- Six-pack soda can rings
See also
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.