Opentopia Directory Encyclopedia Tools

Mazda Luce

Encyclopedia : M : MA : MAZ : Mazda Luce



 

Mazda used the Luce name on its largest sedans in Japan from 1969 until 1989. These vehicles were exported under a variety of names, including RX-4, 929, and Cosmo. The Luce nameplate was replaced by the Mazda Sentia name in 1991.

1965

The 1965 Luce 1500 show car was designed by Giorgetto Giugiaro of Italy (then at Bertone) and was a beautiful sedan. It was low and sharp, looking more like a contemporary BMW Bavaria than any of its smaller Mazda brothers.

The production version had a higher roofline but retained the BMW look. It was a front-engine, rear wheel drive coupe, and featured a square 1.5 L (1490 cc) 1500 SOHC engine, producing 70 hp (52 kW) and 87 ft·lbf (118 N·m). It sold poorly at 695,000 yen (US$1,930) and a stroked 1.8 L (1796 cc) 1800 engine was added for 1968. This new model, the Luce 1800, produced 89 hp (66 kW) and 112 ft·lbf (152 N·m). An estate station wagon was also added.

R130

A rotary-powered Luce appeared the following year. The Luce R130 was produced from October, 1969 to 1972. It used a 1.3 L 13B engine, which produced 126 hp (94 kW) and 127 ft·lbf (172 N·m). Quarter-mile (400m) performance was 16.9 seconds.

See also [A-Spec's '69 Luce page]

1800 (USA)

The Mazda brand entered the United States market in 1970 with just the small R100, but expanded to a full line in 1971. This included all three of the company's piston-powered models, the compact 616, mid-size 1200, and full-size 1800.

The US-market 1800 produced 98 hp and 108 ft·lbf and cost US$2,280. Performance was sluggish, with a 0-60 mph time of 17.5 sec and a 20.5 sec/65 mph quarter mile.

Unlike the rotary cars, the 1800 was a flop. Road & Track magazine said it was solid to the point of being overly-heavy, with pleasant handling but poor performance. They went so far as to call it the "Dullest Car of the Year"! It was gone from the market for 1972.

1972

The 1972 rotary Luce was also known as the Mazda RX-4 in export markets. It was available as a coupe, sedan, and "custom" (station wagon). Two rotary engines were offered, the regular 12A and low-emmissions AP 13B.

Engines:

See [this link]

1978

The 1978 Luce (introduced in October, 1977) was a large and luxurious sedan, still powered by Mazda's piston or rotary engines. It was also available as a four-door pillarless hardtop that looked like a huge, square coupe. This time, it was either the 12A or 13B engines. It was exported as the Mazda 929.

Engines:

See [this link]

1981

For 1981, Mazda brought back the Cosmo name for the HB platform Luce coupe. The sedan was also exported as the Mazda 929. Production of the Cosmo continued after the Luce was replaced in 1986.

Engines:

See [this link]

1986

The 1986 Luce was large and luxurious on the HC platform, now with the 13B turbo engine. It was still exported as the Mazda 929, and differed from the (continued) Cosmo.

1989 was the last year of the Luce nameplate. The Eunos Cosmo continued on a new platform (JC), and the HD platform spawned the Mazda Sentia (now exported as the 929), and the Efini MS-9, but there was no longer a rotary model of the large sedan.

Engines:

See [this link]


Mazda Wankel rotary timeline

Model 1960s 1970s 1980s 1990s 2000s
56789 01234 56789 01234 56789 01234 56789 01234 5
Cosmo/RX-5 S1 S2 RX-5 HB JC
Familia/R100 R100
Luce/RX-4 R130 RX-4 Legato HB HC
Capella/RX-2 RX-2
Savanna/RX-3/RX-7 RX-3 SA FB FC FD
Proceed/REPU REPU
Roadpacer Roadpacer
RX-8 SE

 


From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.


Search Titles
0123456789
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ?

E-mail this article to:

Personal Message: