Phosphor

A phosphor is a substance that exhibits the phenomenon of phosphorescence (sustained glowing without further stimulus).

The Chemical element phosphorus (Greek. phosphoros, meaning "light bearer") was discovered by German alchemist Hennig Brand in 1669 through a preparation from urine. Working in Hamburg, Brand attempted to distill salts by evaporating urine, and in the process produced a white material that glowed in the dark. Since that time, the term phosphorescence has been used to describe substances that shine in the dark without burning.

Phosphorus itself is not a phosphor; it is highly reactive and gives-off a faint glow upon uniting with oxygen. The glow observed by Brand was actually caused by the very slow burning of the phosphorus, but as he saw no flame nor felt any heat he did not recognize it as burning.

Phosphors are transition metal compounds or rare earth compounds of various types. The most common uses of phosphors are in CRT displays and fluorescent lights. CRT phosphors were standardized beginning around World War II and designated by the letter "P" followed by a number.

Contents

1 Materials

1.1 Glow in the dark toys
1.2 Radioactive light sources
1.3 Electroluminescence
1.4 White LEDs
1.5 Cathode ray tubes
1.6 Fluorescent lamps
1.7 Detergents
1.8 Various

2 See also
3 External links

Materials

Phosphors are usually made from a suitable host material, to which an activator is added. The best known type is a copper-activated zinc sulfide and the silver-activated zinc sulfide (zinc sulfide silver).

The host materials are typically oxides, sulfides, selenides, halides or silicates of zinc, cadmium, manganese, aluminum, silicon, or various rare earth metals. The activators prolong the emission time (afterglow). In turn, other materials (eg. nickel) can be used to quench the afterglow and shorten the decay part of the phosphor emission characteristics.

Glow in the dark toys

Spectra of constituent blue, green and red phosphors in a common cathode ray tube.

Zinc sulfide with about 5 ppm of a copper activator is the most common phosphor for the glow-in-the-dark toys and items. It is also called GS phosphor.

Mix of zinc sulfide and cadmium sulfide emit color depending on their ratio; increasing of the CdS content shifts the output color towards longer wavelengths; its persistence ranges between 1-10 hours.

Strontium aluminate activated by europium, SrAlO₃:Eu, is a newer material with higher brightness and significantly longer glow persistence; it produces green and aqua hues, where green gives the highest brightness and aqua the longest glow time. SrAlO₃:Eu is about 10 times brighter, 10 times longer glowing, and 10 times more expensive than ZnS:Cu. The excitation wavelengths for strontium aluminate range from 200 to 450 nm. The wavelength for its green formulation is 520nm, its blue-green version emits at 505nm, and the blue one emits at 490nm. Colors with longer wavelengths can be obtained from the strontium aluminate as well, though for the price of some loss of brightness.

Calcium sulfide with strontium sulfide with bismuth as activator, (Ca,Sr)S:Bi, yields blue light with glow times up to 12 hours, [link] red and orange are modifications of the zinc sulfide formula. Red color can be obtained from strontium sulfide.

In these applications, the phosphor is directly added to the plastic from which the toys are molded, or mixed with a binder for use as paints.

ZnS:Cu phosphor is used in glow-in-the-dark cosmetic creams frequently used for Halloween make-ups. [link]

Generally, the persistence of the phosphor increases as the wavelength decreases. Red and orange phosphors therefore do not have sufficiently long glow times to be commercially attractive for glow-in-the-dark applications.

See also lightstick for chemiluminescence-based glowing items.

Radioactive light sources

Mixtures of zinc sulfide with radioactive materials, where the phosphor was excited by the alpha- and beta-decaying isotopes, were used to paint dials of watches and instruments. The formula used on watch dials between 1913 and 1950 was a mix of radium-228 and radium-226 with a scintillator made of zinc sulfide and silver (ZnS:Ag). [link] However, zinc sulfide undergoes degradation of its crystal lattice structure, leading to gradual loss of brightness significantly faster than the depletion of radium.

The ZnS:Ag phosphor yields greenish glow. It is not suitable to be used in layers thicker than 25 mg/cm², as the self-absorption of the light then becomes a problem. ZnS:Ag coated screens were used by Ernest Rutherford in his experiments discovering atomic nucleus.

Copper-activated zinc sulfide (ZnS:Cu) is the most common phosphor used. It yields blue-green light.

Copper and magnesium activated zinc sulfide (ZnS:Cu,Mg) yields yellow-orange light.

Trasers are light producing devices composed of a sealed borosilicate glass tube with inner coat of a phosphor, filled with tritium. Betalights use tritium as energy source as well.

Electroluminescence

Electroluminescence can be exploited in light sources. Such sources typically emit from a large area, which makes them suitable for backlights of eg. LCD displays. The excitation of the phosphor is usually achieved by application of high-intensity electric field, usually with suitable frequency. The electroluminescent light sources so far tend to degrade with use, resulting in their relatively short operation lifetimes.

Phosphorwhite in powder

ZnS:Cu was the first formulation successfully displaying electroluminescence, tested at 1936 by Georges Destriau in Madame Marie Curie laboratories in Paris.

Indium tin oxide (ITO, also known under trade name IndiGlo) composite is used as a phosphor in some Timex watches, though as the electrode material, not as a phosphor itself. "Californeon" is another trade name of an electroluminescent material, used in electroluminescent light strips.

White LEDs

White light-emitting diodes are usually blue InGaN LEDs with a coating of a suitable phosphor. Cerium(III)-doped YAG (YAG:Ce³⁺, or Y₃Al₅O₁₂:Ce³⁺) is often used; it absorbs the light from the blue LED and emits in a broad range from greenish to reddish, with most of output in yellow. The pale yellow emission of the Ce³⁺:YAG can be tuned by substituting the cerium with other rare earth elements such as terbium and gadolinium and can even be further adjusted by substituting some or all of the aluminium in the YAG with gallium.

White LEDs can also be made by coating near ultraviolet (NUV) emitting LEDs with a mixture of high efficiency europium based red and blue emitting phosphors plus green emitting copper and aluminium doped zinc sulfide (ZnS:Cu,Al). This is a method analogous to the way fluorescent lamps work.

Cathode ray tubes

The phosphors are usually poor electrical conductors. This may lead to deposition of residual charge on the screen, effectively decreasing the energy of the impacting electrons due to electrostatic repulsion (an effect known as "sticking"). To eliminate this, a thin layer of aluminium is deposited over the phosphors and connected to the conductive layer inside the tube. This layer also reflects the phosphor light to the desired direction, and protects the phosphor from ion bombardment resulting from an imperfect vacuum.

Combination of zinc sulfide with copper, the P31 phosphor or ZnS:Cu, provides green light peaking at 531 nm, with long glow.

Combination of zinc sulfide with few ppm of silver, the ZnS:Ag, when excited by electrons, provides strong blue glow with maximum at 450 nm, with short afterglow with 200 nanosecond duration. It is known as the P22B phosphor. [link] This material, zinc sulfide silver, is still one of the most efficient phosphors in cathode ray tubes. It is used as a blue phosphor in color CRTs.

When mixed with cadmium sulfide, the resulting zinc cadmium sulfide (Zn,Cd)S:Ag, provides strong yellow light.

The mix of zinc cadmium sulfide and zinc sulfide silver, the ZnS:Ag+(Zn,Cd)S:Ag is the white P4 phosphor used in black and white television CRTs.

Yttrium oxide-sulfide activated with europium is used as red phosphor in color CRTs. The development of color TVs took a long time due to the long search for a red phosphor.

ZnS:Ag+(Zn,Cd)S:Ag (P4), white phosphor for black and white TV screens and display tubes
Y₂O₂S:Eu+Fe₂O₃ (P22R), red phosphor for TV screens
ZnS:Cu,Al (P22G), green phosphor for TV screens
ZnS:Ag+Co-on-Al₂O₃ (P22B), blue phosphor for TV screens

Zn₂SiO₄:Mn (P1, GJ), yellowish-green (525 nm), 1-100 ms persistence, for display tubes
ZnS:Ag,Cl or ZnS:Zn (P11, BE), blue (460 nm), 0.01-1 ms persistence, for display tubes and vacuum fluorescent displays
(KF,MgF₂):Mn (P19, LF), yellow (590 nm), for radar screens
(KF,MgF₂):Mn (P26, LC), orange (595 nm), over 1 second persistence, for radar screens
(Zn,Cd)S:Ag or (Zn,Cd)S:Cu (P20, KA), yellow-green, 1-100 ms persistence, for display tubes
ZnO:Zn (P24, GE), green (505 nm), 1-10 µs persistence, for vacuum fluorescent displays
(Zn,Cd)S:Cu,Cl (P28, KE), yellow, for display tubes
ZnS:Cu or ZnS:Cu,Ag (P31, GH), yellowish-green, 0.01-1 ms persistence, for oscilloscopes
MgF₂:Mn (P33, LD), orange (590 nm), over 1 second persistence, for radar screens
(Zn,Mg)F₂:Mn (P38, LK), orange (590 nm), for radar screens
Zn₂SiO₄:Mn,As (P39, GR), green (525 nm), for display tubes
ZnS:Ag+(Zn,Cd)S:Cu (P40, GA), white, for display tubes
Gd₂O₂S:Tb (P43, GY), yellow-green (545 nm), for display tubes
Y₂O₂S:Tb (P45, WB), white (545 nm), for viewfinders
Y₂O₂S:Tb, green (545 nm), for display tubes
Y₃Al₅O₁₂:Ce (P46, KG), green (530 nm), for beam index tubes
Y₃(Al,Ga)₅O₁₂:Ce, green (520 nm), for beam index tubes
Y₂SiO₅:Ce (P47, BH), blue (400 nm), for beam index tubes
Y₃Al₅O₁₂:Tb (P53, KJ), yellow-green (544 nm), for projection tubes
Y₃(Al,Ga)₅O₁₂:Tb, yellow-green (544 nm), for projection tubes
ZnS:Ag,Al (P55, BM), blue (450 nm), for projection tubes

InBO₃:Tb, yellow-green (550 nm)
InBO₃:Eu, yellow (588 nm)
ZnS:Ag, blue (450 nm)
ZnS:Cu,Al or ZnS:Cu,Au,Al, green (530 nm)
Y₂SiO₅:Tb, green (545 nm), for projection tubes
(Zn,Cd)S:Cu,Cl+(Zn,Cd)S:Ag,Cl, white
InBO₃:Tb+InBO₃:Eu, amber
ZnS:Ag+ZnS:Cu+Y₂O₂S:Eu, white, Cd-free replacement for P4, black and white CRT tubes, display tubes
InBO₃:Tb+InBO₃:Eu+ZnS:Ag, white

Fluorescent lamps

(Ba,Eu)Mg₂Al₁₆O₂₇, blue phosphor for trichromatic fluorescent lamps
(Ce,Tb)MgAl₁₁O₁₉, green phosphor for trichromatic fluorescent lamps
(Y,Eu)₂O₃, red phosphor for trichromatic fluorescent lamps
(Sr,Eu,Ba,Ca)₅(PO₄)₃Cl, blue phosphor for trichromatic fluorescent lamps
(La,Ce,Tb)PO₄, green phosphor for trichromatic fluorescent lamps

Y₂O₃:Eu, red phosphor (611 nm), for trichromatic blends
LaPO₄:Ce,Tb, green phosphor (544 nm), for trichromatic blends
(Sr,Ca,Ba)₁₀(PO₄)₆Cl₂:Eu, blue phosphor (453 nm) for trichromatic blends

BaMgAl₁₀O₁₇:Eu,Mn, blue-green (456/514 nm)
(La,Ce,Tb)PO₄:Ce,Tb, green (546 nm), for trichromatic lamps
Zn₂SiO₄:Mn, green (528 nm)
Zn₂SiO₄:Mn,Sb₂O₃, green (528 nm)
Ce_0.67Tb_0.33MgAl₁₁O₁₉:Ce,Tb, green (543 nm), for trichromatic lamps
Y₂O₃:Eu(III), red (611 nm), for trichromatic lamps
Mg₄(F)GeO₆:Mn, red (658 nm)
Mg₄(F)(Ge,Sn)O₆:Mn, red (658 nm)
MgWO₄, pale blue (473 nm), wide bandwidth, deluxe blend component
CaWO₄, blue (417 nm)
CaWO₄:Pb (scheelite), blue (433 nm), wide bandwidth
(Ba,Ti)₂P₂O₇:Ti, blue-green (494 nm), wide bandwidth, deluxe blend component
Sr₂P₂O₇:Sn, blue (460 nm), wide bandwidth, deluxe blend component
Ca₅F(PO₄)₃:Sb, blue (482 nm), wide bandwidth
Sr₅F(PO₄)₃:Sb,Mn, blue-green (509 nm), wide bandwidth
BaMgAl₁₀O₁₇:Eu,Mn, blue (450 nm), for trichromatic lamps
BaMg₂Al₁₆O₂₇:Eu(II), blue (452 nm)
BaMg₂Al₁₆O₂₇:Eu(II),Mn(II), blue (450+515 nm)
Sr₅Cl(PO₄)₃:Eu(II), blue (447 nm)
Sr₆P₅BO₂₀:Eu, blue-green (480 nm)
(Ca,Zn,Mg)₃(PO₄)₂:Sn, orange-pink (610 nm), wide bandwidth, blend component
(Sr,Mg)₃(PO₄)₂:Sn, orange-pinkish white (626 nm), wide bandwidth, deluxe blend component
CaSiO₃:Pb,Mn, orange-pink (615 nm)
Ca₅F(PO₄)₃:Sb,Mn, yellow, for Lite-white blend
Ca₅(F,Cl)(PO₄)₃:Sb,Mn, warm white to cool white or blue or daylight

(Ca,Sr,Ba)₃(PO₄)₂Cl₂:Eu, blue (452 nm)
3 Sr₃(PO₄)₂.SrF₂:Sb,Mn, blue (502 nm)
Y(P,V)O₄:Eu, orange-red (619 nm)
(Zn,Sr)₃(PO₄)₂:Mn, orange-red (625 nm)
Y₂O₂S:Eu, red (626 nm)
(Sr,Mg)₃(PO₄)₂:Sn(II), orange-red (630 nm)
3.5 MgO . 0.5 MgF₂ . GeO₂ :Mn, red (655 nm)
Mg₅As₂O₁₁:Mn, red (660 nm)
Ca₃(PO₄)₂.CaF₂:Ce,Mn, yellow (568 nm)

SrAl₂O₇:Pb, ultraviolet (313 nm)
BaSi₂O₅:Pb, ultraviolet (355 nm)
SrFB₂O₃:Eu(II), ultraviolet (366 nm)
SrB₄O₇:Eu, ultraviolet (368 nm)

MgGa₂O₄:Mn(II), blue-green, used in black light displays
(Ce,Tb)MgAl₁₁O₁₉, green

Detergents

Optical brighteners act as UV-sensitive phosphors with close-to-zero afterglow. Usually they are organic compounds.

Various

Some other phosphors commercially available, for use as X-ray screens, neutron detectors, alpha-particle scintillators, etc, are:

Gd₂O₂S:Tb (P43), green (peak at 545 nm), 1.5 ms decay to 10%, low afterglow, high X-ray absorption, for X-ray, neutrons and gamma
Gd₂O₂S:Eu, red (627 nm), 850 µs decay, afterglow, high X-ray absorption, for X-ray, neutrons and gamma
Gd₂O₂S:Pr, green (513 nm), 7 µs decay, no afterglow, high X-ray absorption, for X-ray, neutrons and gamma
Gd₂O₂S:Pr,Ce,F, green (513 nm), 4 µs decay, no afterglow, high X-ray absorption, for X-ray, neutrons and gamma

Y₂O₂S:Tb (P45), white (545 nm), 1.5 ms decay, low afterglow, for low-energy X-ray
Y₂O₂S:Tb (P22R), red (627 nm), 850 µs decay, afterglow, for low-energy X-ray
Y₂O₂S:Tb, white (513 nm), 7 µs decay, no afterglow, for low-energy X-ray

Zn(0.5)Cd(0.4)S:Ag (HS), green (560 nm), 80 µs decay, afterglow, efficient but low-res X-ray
Zn(0.4)Cd(0.6)S:Ag (HSr), red (630 nm), 80 µs decay, afterglow, efficient but low-res X-ray

CdWO₄, blue (475 nm), 28 µs decay, no afterglow, intensifying phosphor for X-ray and gamma
CaWO₄, blue (410 nm), 20 µs decay, no afterglow, intensifying phosphor for X-ray
MgWO₄, white (500 nm), 80 µs decay, no afterglow, intensifying phosphor

Y₂SiO₅:Ce (P47), blue (400 nm), 120 ns decay, no afterglow, for electrons, suitable for photomultipliers
YAlO₃:Ce (YAP), blue (370 nm), 25 ns decay, no afterglow, for electrons, suitable for photomultipliers
Y₃Al₅O₁₂:Ce (YAG), green (550 nm), 70 ns decay, no afterglow, for electrons, suitable for photomultipliers
Y₃(Al,Ga)₅O₁₂:Ce (YGG), green (530 nm), 250 ns decay, low afterglow, for electrons, suitable for photomultipliers

CdS:In, green (525 nm), <1 ns decay, no afterglow, ultrafast, for electrons
ZnO:Ga, blue (390 nm), <5 ns decay, no afterglow, ultrafast, for electrons
ZnO:Zn (P15), blue (495 nm), 8 µs decay, no afterglow, for low-energy electrons

(Zn,Cd)S:Cu,Al (P22G), green (565 nm), 35 µs decay, low afterglow, for electrons
ZnS:Cu,Al,Au (P22G), green (540 nm), 35 µs decay, low afterglow, for electrons
ZnCdS:Ag,Cu (P20), green (530 nm), 80 µs decay, low afterglow, for electrons

ZnS:Ag (P11), blue (455 nm), 80 µs decay, low afterglow, for alpha particles and electrons
anthracene, blue (447 nm), 32 ns decay, no afterglow, for alpha particles and electrons
plastic (EJ-212), blue (400 nm), 2.4 ns decay, no afterglow, for alpha particles and electrons

Zn₂SiO₄:Mn (P1), green (530 nm), 11 ms decay, low afterglow, for electrons

ZnS:Cu (GS), green (520 nm), decay in minutes, long afterglow, for X-rays

CsI:Tl, green (545 nm), 5 µs decay, afterglow, for X-ray, alpha, and electrons

⁶LiF/ZnS:Ag (ND), blue (455 nm), 80 µs decay, for thermal neutrons
⁶LiF/ZnS:Cu,Al,Au (NDg), green (565 nm), 35 µs decay, for neutrons

External links

[Fluorescence], [Phosphorescence]
[Luminescent Inorganic Materials]
[CRT Phosphor Characteristics (P numbers)]
[Phosphor coatings]
[Phosphor Technology Center of Excellence] - PTCOE is a phosphor technology and research consortium hosted by [EOSL], the Electro-Optical Systems Laboratory at GTRI.
[Composition of CRT phosphors]
[AST/Phosphors]
[Phosphors for fluorescent lamps]

From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.