Potassium bromide

Encyclopedia : P : PO : POT : Potassium bromide

Potassium bromide

General
Molecular formula KBr
Molar mass 119.01 g/mol
Appearance white solid
CAS number [7758-02-3]
Properties
Density and phase 2.75 g/cm³, solid
Solubility in water 53.5 g/100 ml (0 °C)
Solubility in ethanol 0.142 g/100 ml (25 °C)
Melting point 734 °C (1007 K)
Boiling point 1435 °C (1708 K)
Structure
Coordination
geometry octahedral
Crystal structure Sodium chloride
Dipole moment 10.41 D (gas)
Supplementary data page
Structure and
properties n, ε_r, etc.
Thermodynamic
data Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
Related compounds
Other anions Potassium fluoride
Potassium chloride
Potassium iodide
Other cations Lithium bromide
Sodium bromide
Rubidium bromide
Caesium bromide
Except where noted otherwise, data are given for
materials in their standard state (at 25 °C, 100 kPa)
[Chemical infoboxInfobox disclaimer and references]

Potassium bromide (K Br) is a salt, widely used as an anticonvulsant and a sedative in the late 19th and early 20th centuries. Its action is due to the bromide ion (sodium bromide is equally effective). Potassium bromide is presently used as veterinary drug, as an antiepileptic medication for dogs and cats. It is a white crystalline powder, soluble in water. In a dilute aqueous solution, potassium bromide tastes sweet, at higher concentration it tastes bitter, and when most concentrated it tastes salty to humans (these effects are due mainly to potassium ion; sodium bromide merely tastes salty at all concentrations). In high concentration potassium bromide strongly irritates the gastric mucous membrane, leading to nausea and sometimes vomiting (again this effect is typical of all soluble potassium salts).

Contents

1 Chemical properties
2 Preparation
3 Uses

3.1 Medical and Vetinary
3.2 Optics

4 External links

4.1 Biological effects
4.2 KBr optics suppliers

Chemical properties

Potassium bromide is a typical ionic salt which is fully dissociated and near pH7 in aqueous solution. It serves as a source of bromide ions- this reaction is important for the manufacture of silver bromide for photographic film:

KBr(aq) + AgNO₃(aq) → AgBr(s) + KNO₃(aq)

Aqueous bromide Br^- will also form complexes when reacted with some metal halides such as copper(II) bromide:

2 KBr(aq) + CuBr₂(aq) → K₂[CuBr₄](aq)

Preparation

A traditional method for the manufacture of KBr is the reaction of potassium carbonate with a bromide of iron, Fe₃Br₈, made by treating scrap iron under water with excess Br₂:

4 K₂CO₃ + Fe₃Br₈ → 8 KBr + Fe₃O₄ + 4 CO₂

Uses

Medical and Vetinary

The anticonvulsant properties of potassium bromide were first noted by Sir Charles Locock at a meeting of the Royal Medical and Chirurgical Society in 1857. Bromide can be regarded as the first effective medication for epilepsy. At the time, it was commonly thought that epilepsy was caused by masturbation. Locock noted that bromide calmed sexual excitement and thought this was responsible for his success in treating seizures. There would not be a better drug for epilepsy until phenobarbital in 1912.

Potassium bromide is currently used as an anti-seizure medication for dogs and cats. It is often used as a supplement to phenobarbital, if seizures are not being successfully controlled with phenobarbital alone. Increasingly, however, it is being considered as a first-line treatment.

Potassium bromide is not approved by the US Food and Drug Administration (FDA) for use in humans to control seizures. In Germany it continues to be approved for use as an antiepileptic drug for humans, particularly children and aldolescents. These indications include severe forms of generalized tonic-clonic seizures, early-childhood-related Grand-Mal-seizures, and also severe myoclonic seizures during childhood. Adults who have reacted positively to the drug during childhood/adolescence may continue treatment. KBr is sold under the brand name Dibro-Be mono® (RX-only). When used for proper indications it shows promising results. The drug has almost complete bioavailability and an extremely long half-life of 6 weeks. One tablet contains 850 mg of potassium bromide. Potassium bromide is not known to interfere with the absorption or excretion of any other anticonvulsant.

The therapeutic index is very small for bromide. As with other antiepileptics, sometimes even therapeutic doses give rise to intoxication. Often indistinctable from 'expected' side-effects, these include:

Loss of appetite, nausea/emesis, lethargy, propensity to sleep during the daytime, depression, loss of concentration and memory, confusion, headache, and

bromism (central reactions reaching from somnolence to coma, cachexia, exicosis, loss of reflexes or pathologic reflexes, clonic seizures, tremor, ataxia [gait abnormalitities], loss of neural sensitivity, paresis, papillar edema of the eyes, abnormal speech, cerebral edema, frank delirium, aggressivity, psychoses)

Acne-form dermatitis and other forms of skin disease may also be seen, as well as mucous hypersecretion in the lungs. Asthma and rhinitis may worsen. Rarely, tongue disorder, aphten, bad breath, and obstipation occur.

Optics

KBr is transparent from the near ultraviolet to long wave infrared wavelengths (0.25-25 µm). It is used for optical windows and prisms. It must be kept in a dry environment due to high solubility and hygroscopic nature. The refractive index is about 1.55 at 1.0 µm. When measuring an infrared transmission spectrum it is a common practice to mix a sample with KBr powder and press the sample into a disk. KBr has no significant optical absorption lines in its high transmission region.

External links

Biological effects

KBr optics suppliers

http://www.almazoptics.com/KBr.htm
http://femtosecondsystems.com/optics/index.php?cPath=73_109
http://www.harricksci.com/infoserver/Optical%20Materials/Potassium%20Bromide.cfm
http://www.crystran.co.uk/products.asp?productid=50

For a full list of external links to MSDSs, spectroscopic data, commercial chemicals suppliers etc. for this compound, see [Chemical sources].

From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.

Potassium bromide

General
Molecular formula	KBr
Molar mass	119.01 g/mol
Appearance	white solid
CAS number	[7758-02-3]
Properties
Density and phase	2.75 g/cm³, solid
Solubility in water	53.5 g/100 ml (0 °C)
Solubility in ethanol	0.142 g/100 ml (25 °C)
Melting point	734 °C (1007 K)
Boiling point	1435 °C (1708 K)
Structure
Coordination geometry	octahedral
Crystal structure	Sodium chloride
Dipole moment	10.41 D (gas)
Supplementary data page
Structure and properties	n, ε_r, etc.
Thermodynamic data	Phase behaviour Solid, liquid, gas
Spectral data	UV, IR, NMR, MS
Related compounds
Other anions	Potassium fluoride Potassium chloride Potassium iodide
Other cations	Lithium bromide Sodium bromide Rubidium bromide Caesium bromide
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) [Chemical infoboxInfobox disclaimer and references]