Opentopia Directory Encyclopedia Tools

Preamplifier

Encyclopedia : P : PR : PRE : Preamplifier


An example of a typical high-end stereo preamplifier.
Enlarge
An example of a typical high-end stereo preamplifier.

A preamplifier (preamp) is an electronic amplifier which precedes another amplifier to prepare an electronic signal for further amplification or processing.

Description

In general, the job of a preamp is to amplify a low level, possibly high impedance, signal to line-level. A list of common sources would include a pickup, microphone, turntable or other transducer. Equalization and tone control may also be applied.

In a home audio system, the term 'preamplifier' may sometimes be used to describe equipment which merely switches between different line level sources and applies a volume control (attenuation), so that no actual amplification may be involved.

In an audio system the second amplifier is typically a power amplifier (power amp). The preamplifier provides voltage gain (about: 10millivolts to 1volt) but no significant currentgain. The power amplifier provides the higher current necessary to drive loudspeakers.

Preamplifiers may be:

To avoid "noise" be sure the metal chassis are interconnected, and shielded cables are so connected at the source end only. No paint under or between the wire and connection! The use of battery power is good both for audio preamps and amplifiers.

Examples

See also

External links

 


From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.

Search Titles
0123456789
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ?

E-mail this article to:

Personal Message: