Q factor
Encyclopedia : Q : QF : QFA : Q factor
- For other uses of the terms Q and Q factor see Q value.
When the system is driven, its resonant behavior depends strongly on Q. Resonant systems respond to frequencies close to their natural frequency much more strongly than they respond to other frequencies. A system with a high Q resonates with a greater amplitude (at the resonant frequency) than one with a low Q factor, and its response falls off more rapidly as the frequency moves away from resonance. Thus, a radio receiver with a high Q would be more difficult to tune with the necessary precision, but would do a better job of filtering out signals from other stations that lay nearby on the spectrum.
Mathematically, the Q factor is defined as the number of oscillations required for a freely oscillating system's energy to fall off to 1/535 of its original energy, where [535=e^]. When the system is driven, the relationship to the width of the resonance is given by
- [Q = \frac],
Electrical systems
For an electrically resonant system, the Q factor represents the effect of electrical resistance and, for electromechanical resonators such as quartz crystals, mechanical friction.
In a tuned radio frequency receiver (TRF) the Q factor is:
- [Q = \frac = \frac \sqrt}]
From the expression for the resonant frequency of a tuned circuit,
- [\omega = \sqrt}]
- [Q = \fracL}]
Often for an electrical system the response can most easily be measured as an amplitude (voltage or a current), rather than energy or power. Since power and energy are proportional to the square of the amplitude of the oscillation, the bandwidth on an amplitude-frequency graph should be measured to [1/\sqrt] of the peak (-3 db), rather than 1/2 (-6 db).
Mechanical systems
For a single damped mass-spring system, the Q factor represents the effect of mechanical resistance.- [Q = \frac}]
From the expression for the resonant frequency of a mass-spring system,
- [\omega = \sqrt}]
- [Q = \fracM}]
Optical systems
In optics, the Q factor of a resonant cavity is given by- [Q = \frac}],
External links
- [Resonance - a chapter from an online textbook]
- [Conversion: Quality factor Q to 'bandwidth per octaves' and 'bandwidth per octaves' N to quality factor Q]
- [Analysis of the damped mass-spring differential equation]
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.
