Swiss coordinate system
Encyclopedia : S : SW : SWI : Swiss coordinate system
The Swiss coordinate system (or Swiss grid) is a geographic coordinate system used in Switzerland for maps and surveying by the Swiss Federal Office of Topography (Swisstopo).
The map projection used is Oblique Mercator on a 1841 Bessel ellipsoid.
The geodetic datum CH1903 uses as fundamental point the old observatory of Berne (), the current location of the Institut für exakte Wissenschaften of the University of Berne. In order to avoid errors during coordinate transmissions, the coordinates of this point are 600'000 m E / 200'000 m N. The 0 / 0 coordinate is located near Bordeaux, France. This definition invokes the following effects:
- All coordinates are always positive, since Switzerland is located in the 1st quadrant of the coordinate system.
- Furthermore, the whole area of Switzerland is located below the y=x line of the coordinate system. Thus, all E-coordinates are always bigger than N-coordinates.
- Finally, the area is situated between 100 and 999 km both E and N, therefore all coordinates always contain - measured in meters - six digits.
| CH1903 | y = 602 030.68 m | x = 191 775.03 m |
|---|---|---|
| CH1903+ | E = 2 602 030.74 m | N = 1 191 775.03 m |
External links
- Swisstopo: [Swiss map projections]
- [Map Projections of Switzerland]
- Converters: [link], [link], [link]
- Online maps with search by Swiss coordinates:
- *http://www.sanday.ch Endoxon
- *http://www.geoportal.ch (GIS for cantons SG, AR)
- *http://www.gis.zh.ch/gb4/bluevari/gb.asp (GIS for canton ZH)
- [Zimmerwald Observatory]
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.
