Tin(II) chloride

Encyclopedia : T : TI : TIN : Tin(II) chloride

---

Tin(II) chloride
General
Systematic name	Tin(II) chloride
Other names	Stannous chloride Tin salt Tin dichloride Tin protochloride
Molecular formula	SnCl2
Molar mass	189.60 g/mol (anhydrous) 225.63 (dihydrate)
Appearance	White crystalline solid
CAS number	[7772-99-8] (anhydrous) [10025-69-1] (dihydrate)
Properties
Density and phase	3.95 g/cm3, anhydrous solid 2.71 g/cm3, dihydrate (15 °C)
Solubility in water	83.9 g/100 ml (0 °C) Hydrolyses in hot water
In ethanol, diethyl ether, acetic acid, acetone, ethyl acetate	soluble
Melting point	246 °C (519 K)
Boiling point	623 °C (896 K)
Structure
Molecular shape	Bent (gas phase)
Coordination geometry	Trigonal pyramidal (anhydrous) Dihydrate also three-coordinate
Crystal structure	Layer structure (chains of SnCl3 groups)
Hazards
MSDS	External MSDS
Main hazards	Corrosive
NFPA 704
R/S statement	R: 22-34-37 S: 26-36/37/39-45
RTECS number	XP8700000 (anhydrous) XP8850000 (dihydrate)
Supplementary data page
Structure & properties	n, εr, etc.
Thermodynamic data	Phase behaviour Solid, liquid, gas
Spectral data	UV, IR, NMR, MS
Related compounds
Other anions	Tin(II) fluoride Tin(II) bromide
Other cations	Tin(IV) chloride Germanium dichloride Lead(II) chloride
Except where noted otherwise, data are given for materials in their standard state (at 25°C, 100 kPa) [Chemical infoboxInfobox disclaimer and references]

Tin(II) chloride (stannous chloride) is a white crystalline solid with the formula ₂. It forms a stable dihydrate, but aqueous solutions tend to undergo hydrolysis, particularly if hot. SnCl₂ is widely used as a reducing agent (in acid solution), and in electrolytic baths for tin-plating. Tin(II) chloride should not be confused with the other chloride of tin, tin(IV) chloride or stannic chloride (SnCl₄).

Structure

SnCl₂ has a lone pair, such that the molecule in the gas phase is bent. In the solid state, crystalline SnCl₂ forms chains linked via chloride bridges as shown. The dihydrate is also three-coordinate, with one water coordinated on to the tin, and a second water coordinated to the first. The main part of the molecule stacks into double layers in the crystal lattice, with the "second" water sandwiched between the layers.

Chemical properties

Tin(II) chloride can dissolve in less than its own mass of water without apparent decomposition, but as the solution is diluted hydrolysis occurs to form an insoluble basic salt:

Therefore if clear solutions of tin(II) chloride are to be used, hydrochloric acid must be added in order to maintain the equilibrium towards the left-hand side (using Le Chatelier's principle). Solutions of SnCl₂ are also unstable towards oxidation by the air:

6 SnCl₂(aq) + O₂(g) + 2 Water (molecule)(l) → 2 SnCl₄(aq) + 4 Sn(OH)Cl(Solid|s)

This can be prevented by storing the solution over lumps of tin metal.^{[#endnote_ChemElements]}

There are many such cases where tin(II) chloride acts as a reducing agent, reducing silver and gold salts to the metal, and iron(III) salts to iron(II), for example:

SnCl₂(aq) + 2 FeCl₃(aq) → SnCl₄(aq) + 2 FeCl₂(aq)

Solutions of tin(II) chloride can also serve simply as a source of Sn²⁺ ions, which can form other tin(II) compounds via precipitation reactions, for example brown (or black) tin(II) sulfide:

SnCl₂(aq) + Na₂S(aq) → SnS(s) + 2 NaCl(aq)

If alkali is added to a solution of SnCl₂, a white precipitate of hydrated tin(II) oxide forms initially; this then dissolves in excess base to form a stannite salt such as sodium stannite:

SnCl₂(aq) + 2 NaOH(aq) → SnO·H₂O(s) + 2 NaCl(aq)

SnO·H₂O(s) + NaOH(aq) → NaSn(OH)₃(aq)

Anhydrous SnCl₂ can be used to make a variety of interesting tin(II) compounds in non-aqueous solvents. For example, the lithium salt of 4-methyl-2,6-di-tert-butylphenol reacts with SnCl₂ in THF to give the yellow linear two-coordinate compound Sn(OAr)₂ (Ar = aryl).^{[#endnote_Cetinkaya]}

Tin(II) chloride also behaves as a Lewis acid, forming complexes with ligands such as chloride ion, for example:

SnCl₂(aq) + CsCl(aq) → CsSnCl₃(aq)

Most of these complexes are pyramidal, and since complexes such as SnCl₃ have a full octet, there is little tendency to add more than one ligand. The lone pair of electrons in such complexes is available for bonding, however, and therefore the complex itself can act as a Lewis base or ligand. This seen in the ferrocene-related product of the following reaction :

SnCl₂ + Fe(η⁵-C₅H₅)(CO)₂HgCl → Fe(η⁵-C₅H₅)(CO)₂SnCl₃ +

SnCl₂ can be used to make a variety of such compounds containing metal-metal bonds, for example:

SnCl₂ + Co₂(CO)₈ → (CO)₄Co-(SnCl₂)-Co(CO)₄

Preparation

Anhydrous SnCl₂ is prepared by the action of dry hydrogen chloride gas on tin metal. The dihydrate is made by a similar reaction, using hydrochloric acid:

Sn(s) + 2 HCl(aq) → SnCl₂(aq) + H₂(g)

The water is then carefully evaporated from the acidic solution to produce crystals of SnCl₂·2H₂O. This dihydrate can be dehydrated to anhydrous using acetic anhydride.

Uses

A solution of tin(II) chloride containing a little hydrochloric acid is used for the tin-plating of steel, in order to make tin cans. An electric potential is applied, and tin metal is formed at the cathode via electrolysis.

It is used as a catalyst in the production of the plastic polylactic acid (PLA).

Tin(II) chloride also finds wide use as a reducing agent. This is seen in its use for silvering mirrors, where silver metal is deposited on the glass:

Sn²⁺(aq) + 2 Ag⁺ → SnCl⁴⁺]](aq) + (s)

A related reduction was traditionally used as an analytical test for ²⁺(aq). For example, if SnCl₂ is added dropwise into a solution of mercury(II) chloride, a white precipitate of mercury(I) chloride is first formed; as more SnCl₂ is added this turns black as metallic mercury is formed.

In organic chemistry, SnCl₂ is mainly used in the Stephen reduction, whereby a nitrile is reduced (via an imidoyl chloride salt) to an imine which is easily hydrolysed to an aldehyde. The reaction usually works best with aromatic nitriles Aryl-CN. A related reaction (called the Sonn-Müller method) starts with an amide, which is treated with PCl₅ to form the imidoyl chloride salt.

The Stephen reduction is less used today, because it has been mostly superseded by diisobutylaluminium hydride reduction.

Additionally, SnCl₂ is used to selectively reduce aromatic nitro groups to anilines.^{[#endnote_Bellamy]}

SnCl₂ also reduces quinones to hydroquinones.

Stannous chloride is also added as a food additive with E number E512 to some canned and bottled foods, where it serves as a color-retention agent and antioxidant.

References

1. ↑  H. Nechamkin, The Chemistry of the Elements, McGraw-Hill, New York, 1968.
2. ↑  B. Cetinkaya, I. Gumrukcu, M. F. Lappert, J. L. Atwood, R. D. Rogers, M. J. Zaworotko, ''J. Am. Chem. Soc. 102, 2088-2089 (1980).
3. ↑  Bellamy, F. D.; Ou, K Tetrahedron Lett. 1984, 25, 839-842.

General References

• N. N. Greenwood, A. Earnshaw, Chemistry of the Elements, 2nd ed., Butterworth-Heinemann, Oxford, UK, 1997.
• Handbook of Chemistry and Physics, 71st edition, CRC Press, Ann Arbor, Michigan, 1990.
• The Merck Index, 7th edition, Merck & Co, Rahway, New Jersey, USA, 1960.
• A. F. Wells, 'Structural Inorganic Chemistry, 5th ed., Oxford University Press, Oxford, UK, 1984.
• J. March, Advanced Organic Chemistry, 4th ed., p. 723, Wiley, New York, 1992.

External links

• For a full list of external links to MSDSs, spectroscopic data, commercial chemicals suppliers etc. for this compound, see [Chemical sources].

 

---

From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.

Search Titles

0

1

2

3

4

5

6

7

8

9

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

?