UNIVAC 1100/2200 series
Encyclopedia : U : UN : UNI : UNIVAC 1100/2200 series
The UNIVAC 1100/2200 series is a series of compatible 36-bit computer systems, beginning with the UNIVAC 1107 in 1962, initially made by Sperry Rand. The series continues to be supported today by Unisys Corporation as the ClearPath IX.
Architecture
Data Formats
- Fixed-point either integer or fraction
- *Whole word - 36 bit (one's complement)
- *Half word - two 18 bit fields per word (unsigned or one's complement)
- *Third word - three 12 bit fields per word (one's complement)
- *Quarter word - four 9 bit fields per word (unsigned)
- *Sixth word - six 6 bit fields per word (unsigned)
- Floating point
- *Single precision - 36 bits: 1 sign bit, 8 bit characteristic, 27 bit mantissa
- *Double precision - 72 bits: 1 sign bit, 11 bit characteristic, 60 bit mantissa
- Alphanumeric
- *Fieldata - 6 bits
- *ASCII - 9 bits
Instructions are 36 bits long with the following fields:
- f ( 6 bits) - function designator (opcode),
- j ( 4 bits) - partial word designator, J-register designator, or minor function designator,
- a ( 4 bits) - register (A, X, or R) designator or I/O designator,
- x ( 4 bits) - index register (X) designator,
- h ( 1 bit ) - index register increment designator,
- i ( 1 bit ) - indirect address designator,
- u (16 bits) - address or operand designator.
| Address | Register | Contents | |
|---|---|---|---|
| 000 | Unused | Unused | |
| 001 | X1 | Increment | Modifier |
| ... | ... | Increment | Modifier |
| 013 | X11 | Increment | Modifier |
| 014 | X12/A0 | Overlap (X or A) | |
| ... | ... | Overlap (X or A) | |
| 017 | X15/A3 | Overlap (X or A) | |
| 020 | A4 | Accumulator | |
| ... | ... | Accumulator | |
| 033 | A15 | Accumulator | |
| 034 | A15+1 | Unassigned (A) | |
| ... | ... | Unassigned (A) | |
| 037 | A15+4 | Unassigned (A) | |
| ... | Executive | Protected Executive | |
| 101 | R1 | Special (R) | |
| ... | ... | Special (R) | |
| 117 | R15 | Special (R) | |
| ... | Executive | Protected Executive | |
| 177 | Executive | Protected Executive | |
The 128 registers of the high speed "general register stack", map to the current data space in main storage starting at memory address zero. These registers include both user and executive copies of the A, X, R, and J registers and many special function executive registers.
The table on the right shows the addresses (in octal) of the user registers.
There are 15 index registers (X1 ... X15), 16 accumulators (A0 ... A15), and 15 special function user registers (R1 .. R15). The 4 J registers and 3 "staging registers" are uses of some of the special function R registers.
One interesting feature is that the last 4 index registers (X12 ... X15) and the first 4 accumulators (A0 ... A3) overlap, allowing data to be interpreted either way in these registers. This also results in 4 unassigned accumulators (A15+1 ... A15+4) that can only be accessed by their memory address (double word instructions on A15 do operate on A15+1).
Early UNIVAC machines with 110x numbers, but not in the 1100 series
These machines had different architectures and word sizes and were not compatible with each other. They all used vacuum tubes and many used drum memory as their main memory.
- UNIVAC 1101 introduced in 1950.
- UNIVAC 1102 introduced in 1953.
- UNIVAC 1103 introduced in 1953.
- UNIVAC 1104 introduced in 1957.
- UNIVAC 1105 introduced in 1958.
UNIVAC 1100 series
These machines had a common architecture and word size. They all used transistorized electronics and integrated circuits. Early machines used core memory until that was replaced with semiconductor memory in 1975.
- UNIVAC 1107 introduced in 1962
- UNIVAC 1108 introduced in 1965
- UNIVAC 1106 introduced in 1969
- UNIVAC 1110 introduced in 1970
- UNIVAC 1100/10 redesignation of UNIVAC 1106 in 1975
- UNIVAC 1100/20 redesignation of UNIVAC 1108 in 1975
- UNIVAC 1100/40 redesignation of UNIVAC 1110 in 1975
- UNIVAC 1100/181 introduced in 1975
- UNIVAC 1100/80 introduced in 1977
- UNIVAC 1100/60 introduced in 1979
- UNIVAC 1100/70 introduced in 1981
- UNIVAC 1100/90 introduced in 1982
SPERRY 2200 series
In 1983 Sperry Corporation discontinued usage of the name UNIVAC for their products.
UNISYS 2200 series
In 1986 Sperry Corporation merges with Burroughs Corporation to become Unisys Corporation.
- UNISYS 2200/200 introduced in 1986
- UNISYS 2200/400 introduced in 1988
- UNISYS 2200/600 introduced in 1989
- UNISYS 2200/100 introduced in 1990
- UNISYS 2200/500 introduced in 1993
- UNISYS 2200/900 introduced in 1993
- UNISYS 2200/3800 introduced in 1997
UNISYS ClearPath IX series
In 1996 Unisys Corporation introduces the ClearPath IX series.
See also
External links
- [A history of Univac computers and Operating Systems] (PDF file)
From Wikipedia, the Free Encyclopedia. Original article here. Support Wikipedia by contributing or donating.
All text is available under the terms of the GNU Free Documentation License See Wikipedia Copyrights for details.
